Menu 1 - General Setup

System Name= P-793H
Location=
Contact Person’s Name=
Domain Name=
Edit Dynamic DNS= No

Route IP= Yes
Bridge= No

Menu 2 - WAN Setup

Service Mode= 2wire
Service Type= Server
Rate Adaption= Enable                       Rate Adaption= N/A
Transfer Max Rate(Kbps)= 5696       Transfer Max Rate(Kbps)= N/A
Transfer Min Rate(Kbps)= 192           Transfer Min Rate(Kbps)= N/A
Standard Mode= ANSI(ANNEX_A)   Standard Mode= N/A
Wan Backup Setup:
Check Mechanism = DSL Link
Check WAN IP Address1 = 0.0.0.0
Check WAN IP Address2 = 0.0.0.0
Check WAN IP Address3 = 0.0.0.0
KeepAlive Fail Tolerance = 0
Recovery Interval(sec) = 0
ICMP Timeout(sec) = 0
Traffic Redirect = No
Dial Backup = No

Menu 3.2 - TCP/IP and DHCP Setup

DHCP Setup
DHCP= Server
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-2B
Multicast= None
IP Policies=
Edit IP Alias= No

Menu 11.1 - Remote Node Profile

Rem Node Name= MyISP      Route= IP
Active= Yes                             Bridge= No

Encapsulation= ENET ENCAP      Edit IP/Bridge= Yes
Multiplexing= LLC-based               Edit ATM Options= No
Service Name= N/A                       Edit Advance Options= N/A
Incoming:                                       Telco Option:
Rem Login= N/A                           Allocated Budget(min)= N/A
Rem Password= N/A                     Period(hr)= N/A
Outgoing:                                        Schedule Sets= N/A
My Login= N/A                              Nailed-Up Connection= N/A
My Password= N/A                       Session Options:
Authen= N/A                                  Edit Filter Sets= No
Line= 1                                           Idle Timeout(sec)= N/A

<для перехода к меню 11.3 установите значение Yes в поле Edit IP/Bridge>

Menu 11.3 - Remote Node Network Layer Options

IP Options:                                    Bridge Options:
IP Address Assignment = Static     Ethernet Addr Timeout(min)= N/A
Rem IP Addr = 192.168.10.2
Rem Subnet Mask= 255.255.255.0
My WAN Addr= 192.168.10.1
NAT= None
Address Mapping Set= N/A
Metric= 2
Private= No
RIP Direction= None
Version= RIP-1
Multicast= None
IP Policies=

<на обоих модемах нужно отключить Firewall (по умолчанию он включен), в противном случае модем будет блокировать весь трафик из WAN в LAN>

Menu 21.2 - Firewall Setup

The firewall protects against Denial of Service (DoS) attacks when
it is active. The default Policy sets

1. allow all sessions originating from the LAN to the WAN and
2. deny all sessions originating from the WAN to the LAN

You may define additional Policy rules or modify existing ones but
please exercise extreme caution in doing so

Active: No

LAN-to-WAN Set Name: ACL Default Set
WAN-to-LAN Set Name: ACL Default Set

Please configure the Firewall function through Web Configurator

Menu 1 - General Setup

System Name= P-793H
Location=
Contact Person’s Name=
Domain Name=
Edit Dynamic DNS= No

Route IP= Yes
Bridge= No

Menu 2 - WAN Setup

Service Mode= 2wire
Service Type= Client
Rate Adaption= N/A                      Rate Adaption= N/A
Transfer Max Rate(Kbps)= N/A     Transfer Max Rate(Kbps)= N/A
Transfer Min Rate(Kbps)= N/A      Transfer Min Rate(Kbps)= N/A
Standard Mode= N/A                    Standard Mode= N/A
Wan Backup Setup:
Check Mechanism = DSL Link
Check WAN IP Address1 = 0.0.0.0
Check WAN IP Address2 = 0.0.0.0
Check WAN IP Address3 = 0.0.0.0
KeepAlive Fail Tolerance = 0
Recovery Interval(sec) = 0
ICMP Timeout(sec) = 0
Traffic Redirect = No
Dial Backup = No

Menu 3.2 - TCP/IP and DHCP Setup

DHCP Setup
DHCP= Server
Client IP Pool Starting Address= 192.168.2.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.168.2.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-2B
Multicast= None
IP Policies=
Edit IP Alias= No

Menu 11.1 - Remote Node Profile

Rem Node Name= MyISP     Route= IP
Active= Yes                           Bridge= No

Encapsulation= ENET ENCAP      Edit IP/Bridge= Yes
Multiplexing= LLC-based              Edit ATM Options= No
Service Name= N/A                      Edit Advance Options= N/A
Incoming:                                       Telco Option:
Rem Login= N/A                           Allocated Budget(min)= N/A
Rem Password= N/A                    Period(hr)= N/A
Outgoing:                                       Schedule Sets= N/A
My Login= N/A                            Nailed-Up Connection= N/A
My Password= N/A                      Session Options:
Authen= N/A                                Edit Filter Sets= No
Line= 1                                         Idle Timeout(sec)= N/A

<для перехода к меню 11.3 установите значение Yes в поле Edit IP/Bridge>

Menu 11.3 - Remote Node Network Layer Options

IP Options:                                     Bridge Options:
IP Address Assignment = Static      Ethernet Addr Timeout(min)= N/A
Rem IP Addr = 192.168.10.1
Rem Subnet Mask= 255.255.255.0
My WAN Addr= 192.168.10.2
NAT= None
Address Mapping Set= N/A
Metric= 2
Private= No
RIP Direction= None
Version= RIP-1
Multicast= None
IP Policies=

<на обоих модемах нужно отключить Firewall (по умолчанию он включен), в противном случае модем будет блокировать весь трафик из WAN в LAN>

Menu 21.2 - Firewall Setup

The firewall protects against Denial of Service (DoS) attacks when
it is active. The default Policy sets

1. allow all sessions originating from the LAN to the WAN and
2. deny all sessions originating from the WAN to the LAN

You may define additional Policy rules or modify existing ones but
please exercise extreme caution in doing so

Active: No

LAN-to-WAN Set Name: ACL Default Set
WAN-to-LAN Set Name: ACL Default Set

Please configure the Firewall function through Web Configurator